One 3.5 ounce Tungsten Canopy.
Overall Length - 1-3/4 inches
Overall Width - 1-3/16 inch
Height Above Car Body - 1/3 inch
Stud Diameter - 1/2 inch
Stud Length - 1/4 inch
What is Tungsten?
Tungsten is a metal with one of the highest densities. Tungsten is 1.7 times more dense than lead, 2.4 times denser than steel, and 2.7 times denser than zinc.
How to Use this Product
The Tungsten Canopy can be easily used for pinewood derby car weighting if the weight of the car body, wheels, and axles is less than 1.5 ounces. Drill a 1/2 inch diameter hole into the top of the car body (generally the hole is drilled all the way through the car). Apply epoxy in the hole, and spread just a little epoxy on the top of the car as well. Mount the canopy and allow it to dry.
Since the Tungsten Canopy is very hard, do not plan to drill out any extra weight. Instead, use an alternate method to make fine adjustments such as adding/removing tungsten putty, beads, etc. In the photo, 3/16 inch tungsten cubes are used.
Copyright © 2017 by Maximum Velocity, Inc.
® Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Pinewood Derby is a registered trademark of Boy Scouts of America.
Awana is a registered trademark of Awana Clubs International.
PineCar is a registered trademark of PineCar.