Maximum Velocity!

Pinewood Derby Specialty Tools

Page 4

Main Menu

Checkout/View Cart


Tool Packs    Wheel Mandrels

Clamping and Holding    Wheel Hub Tools

Wheel Tread Tools    Wheel Bore Tools

Axle Tools     Body Tools

Drilling Tools     Measurement Tools

Click Here to see how the specialty tools apply to your kit.

Body Tools

Pro-Body Tool II

The Pro-Body Tool II will improve the speed of your pinewood derby car by:
  1. Axle Slot Preparation - For kits with axle slots, the Pro-Body Tool II ensures accurate axle positioning by allowing you to drill accurate axle pilot holes into the existing axle slots with a hand drill!. The pilot holes ensure that the axles are mounted square and true on the car. Improved axle mounting accuracy equals greater speed!

  2. Axle Hole Drilling - For races which allow axle holes, the Pro-Body Tool II serves as a guide for drilling accurate axle holes with a hand drill. Again, improved axle mounting accuracy equals greater speed!

  3. Raised Hole - The third hole (Part 5140 and 5145) allows a raised hole to be drilled for running on three wheels.

  4. Axle Hole Re-drilling - For kits with the screw and 3/8" dowel rod axle system, the Pro-Body Tool (Part 5148) allows you to accurately re-drill the axle pilot holes.

Pro-Body Tool II
Click Here for More Information

5140
Pro-Body Tool II
For BSA kits, and other kits with .087 OD axles
(#44 bit included)

In Stock
$12.95
5145
Pro-Body Tool II
For Awana Kits, and other kits with 3/32 OD axles
(3/32 inch bit not included)

In Stock
$12.95



Pro-Body Tool
Click Here for More Information

5148
Pro-Body Tool
For Royal Ranger, S&W, and Other Kits with Screw & 3/8" Dowel Rod Axle Systems
(3/32" bit not included)

In Stock
$9.95
Pro-Body Jig

Now drill all holes with one setup! Based on the Pro-Body Tool II, the Pro-Body Jig allows the distance between the front and back axle holes to be precisely set, and then repeatedly applied to multiple blocks. As an added bonus, the Pro-Body Jig allows the center of gravity of the car to be slightly lowered to enhance stability.

Notes:
  1. Because the Pro-Body Jig drills holes higher on the block, it cannot be used to put pilot holes in axle slots. Use the 5140-Pro-Body Tool for piloting slots.

Pro-Body Jig
Click Here for More Information

5146
Pro-Body Jig
For BSA, PineCar, and other kits with nail axles (#44 bit included)
In Stock
$42.95
Pro-Body Slotter

The new Pro-Body Slotter is a cutting guide that provides an accurate way to cut new slots on your pinewood derby block. The slots can be cut at the standard wheelbase position, the extended wheelbase position, or a custom wheelbase position.

Notes:
  1. A hack-saw equipped with two blades is required - not included. 24 teeth per inch blades are recommended.

  2. The tool will create two "dimples" on the side of the block, one above each slot position. These dimples will be hidden by the wheels, but can be patched with wood filler.

Pro-Body Slotter
Click Here for More Information

5143
Pro-Body Slotter
For BSA, MV, PineCar, and other kits with .087 OD axles)
In Stock
$15.95

Drilling

Pin Vise

This handy manual drill is great for pinewood derby cars. It accepts drill bit sizes from 1/64 to 3/32 inch (a #44 bit works great), and allows easy rotation of the bit. Unlike many pin vises with small handles, the large wooden handle fits comfortably into your hand, and allows more firm pressure on the bit. You can use the pin vise to:
Pin Vise
Click Here for More Information

5142
Pin Vise
In Stock
$8.95
T-Tool

The T-Tool is a precision-machined, aluminum jig that will improve the speed of your pinewood derby car through accurate weight placement. The T-Tool:
T-Tool
Click Here for More Information

5144
T-Tool Weight Drilling Jig
In Stock
$18.95
Drill Bits
25/64 inch bit
Click Here for a Larger Picture

5001
25/64 inch
Brad Point
Drill Bit
In Stock
$6.95
25/64 inch bit
Click Here for a Larger Picture

5004
19/64 inch
Brad Point
Drill Bit
In Stock
$5.95
1-1/16 inch bit
Click Here for a Larger Picture

5002
1-1/16 inch
Forstner Drill Bit
Drill Bit
In Stock
$8.45
#44 Cobalt Drill Bit
Click Here for More Information

5003
Cobalt
Split-Point
#44 Drill Bit
In Stock
$2.50

<         1         2         3         4         5         >

Main Menu


Our Guarantee

We cannot guarantee that your car will win a trophy, but we can guarantee that you will be satisfied with our products. If you are not satisfied with a product, please refer to our Return Policy.


Copyright © 2018 by Maximum Velocity, Inc.

® Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Pinewood Derby is a registered trademark of Boy Scouts of America.
Awana is a registered trademark of Awana Clubs International.
PineCar is a registered trademark of PineCar.