Main Menu


MAXIMUM VELOCITY! ®

Dry Transfer Decals Application Instructions
for Pinewood Derby Cars

Unlike other decals, dry transfer decals are applied with pressure. To apply, follow this procedure:
  1. Remove any dust or debris from the surface of the car.

  2. Cut out the portion of the material that has the desired decal. It is not necessary to cut along the edge of the actual decal.

  3. Place the decal on the desired location on the car. Do not press firmly until the decal is positioned properly.

  4. Using a dull pencil, rub over the entire decal using medium pressure. Do not press very hard as the decal could tear or the car surface could be damaged.

  5. Carefully peel back the carrier material. If the decal is not fully transferred, replace the carrier material and rub on the untransferred area with the pencil.

  6. Remove the carrier material. If desired a clear gloss spray can be applied over the car and decals.

Don't forget to save the extra decals for another project!


Copyright © 2017 by Maximum Velocity, Inc.

® Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Pinewood Derby is a registered trademark of Boy Scouts of America.
Awana is a registered trademark of Awana Clubs International.
PineCar is a registered trademark of PineCar.