Main Menu


MAXIMUM VELOCITY! ®

Max-V-LubeTM Dry Graphite
for Pinewood Derby Cars




Max-V-Lube dry graphite is a proprietary blend of high-purity natural flake graphite for pinewood derby cars. After extensive testing against other brands of graphite, we are offering Max-V-Lube as our premier graphite for pinewood derby performance.

Application

Apply Max-V-Lube as follows:

  1. Fill the bore of the wheel with graphite.

  2. Insert an axle into the wheel bore.

  3. With one hand, firmly grasp the axle and hold the axle horizontal to the ground.

  4. With the other hand, spin the tire gently -- don't drop the axle. Spin the wheel ten times.

  5. Hold the axle with the wheel hanging towards the ground.

  6. Deposit some lube into the gap between the axle and wheel bore.

  7. Tap the wheel gently to help move the lube down into the wheel bore.

  8. Repeat steps 3 to 7, two more times.

  9. Finally, spin the wheel 10 times. Don't add any more graphite after this point.

After performing this procedure keep the wheel/axle pairs together as a unit.

Technical Information

Carbon Content: 99.9% (typical)
Particle Size: 80-90% -200 Mesh (approx. 75 micron)
Quantity: 0.25 ounce


Copyright © 2017 by Maximum Velocity, Inc.

® Maximum Velocity! is a registered trademark of Maximum Velocity, Inc.
Pinewood Derby is a registered trademark of Boy Scouts of America.
Awana is a registered trademark of Awana Clubs International.
PineCar is a registered trademark of PineCar.