MAXIMUM VELOCITY! ®
for Pinewood Derby Racing
Simichrome polish will put a high shine on your pinewood derby axles. Just a dab is all it takes to create slick, shiny, high performance axles.
Perform the following steps to polish axles. Always were safety glasses when using a rotating tool to polish axles.
Application to Maximum Velocity Products
Fasten a drill or rotating tool to a worksurface using a Drill Mount, clamp, or vise.
Insert an axle into the chuck of the tool, and start the drill.
Apply a small dab of polish to a clean, soft rag.
Apply the polish to the axle for about 15 seconds. Make sure to polish the portion of the shaft on which the wheel will spin, and polish the underside of the axle head.
Buff off the residue with a clean part of the rag until no more black residue comes off the axle.
Repeat the above steps for each axle.
Simichrome polish may be applied directly to the following products to produce a final shine.
4025 - Awana Speed Axles
4093 - Super Speed Axles
4094 - BSA Speed Axles
4095 - Zinc-Plated Speed Axle
4096 - Nickel Plated Speed Axles
4097 - Official BSA Speed Axles
4098 - Grooved Super Speed Axles
4099 - Grooved BSA Speed Axles
5465 - Awana Axles
For axles with flaws that must be removed with a file, use our 5100-Axle Polishing Kit.
Copyright © 2017 by Maximum Velocity, Inc.
® Maximum Velocity!
is a registered trademark of Maximum Velocity,
is a registered trademark of Boy Scouts of
is a registered trademark of Awana Clubs International.
is a registered trademark of PineCar.